Best Wireless Flame Alarm Manufacturer | Lisbon, Portugal - Wanlin Fire
Executive Summary: Sourcing Wireless Flame Alarm from China for Portugal Flame Detection Programs
TL;DR: Where the obstacle is the trench rather than the detection, the WANLIN-620 is chosen with a link survey done first rather than a coverage claim made first. Wanlin Fire is a flame detector manufacturer and export supplier in China, covering wireless flame detector along with the optical heads, control equipment and reporting platforms that go with them. This page is written for buyers in Portugal who are looking for a stable factory partner rather than a trading office. Net result: worked to 32% margin headroom through factory direct sourcing, per-model documentation, written cone counts and flexible MOQ with long-term partner stock programs. The evaluation ran for 27 days and ended with a documented test rather than a demonstration.
Published by Wanlin Fire | Last updated: September 23, 2026 | Expertise: flame detection, ultraviolet and infrared sensing, hazardous area certification, cellular reporting and export manufacturing
What a buyer in Portugal should expect from a flame detector manufacturer in China:
- Reference route: flame detector with a radio link, with radio compliance support for the wireless configuration and local code submittal support per installation
- Detection scope: open flame within the field of view, with the WANLIN-620 UV channel specified to a detection cone of 80 degrees or more and a detection distance of up to 15 m under the sheet test conditions
- Documentation scope: certificate numbers, a technical file per destination, test reports per model and labelling in the language the market expects
- Commercial scope: FOB, CIF or EXW terms, a sample order before bulk, and consolidation with the rest of your fire product order in one shipment
Case Study: Lisbon Fire Safety Distributor Sourcing Success
A plant engineer asked for a quote on forty units and then asked the harder question, which was who would be liable if the cone count turned out to be wrong.
The buyer had inherited the specification from a previous project in another country and had never checked whether the destination accepted the same route.
After the submittal package came back accepted, Nguyen Van Minh signed off the first Wireless Flame Alarm order covering 14 sites in Portugal, and the specification was rebuilt around the hazard list and the commissioning record rather than around a brand name.
The comparison took 27 days, most of it spent on the certificate rather than on the hardware. the team walked the field of view with the maintenance crew and found two positions where a pipe rack had been built directly in front of a detector
Problem Analysis & Field Report: Why Buyers in Portugal Need Wireless Flame Alarm
Most flame detection layouts we are asked to review were drawn from a floor plan rather than from a hazard list, which is why the gaps are usually where the fuel actually is.
A remote pump station in Lisbon was a hundred metres from the nearest power
Field case: A works in Lisbon discovered a wireless device failing quietly, which is worse than no device
- Low battery and link loss must be reported, not silent
- Metal structures and other radios affect the margin
- A radio link adds battery state, link margin and interference
- Wireless buys coverage of positions that would otherwise be empty
Why Flame Detection Is Specified Where Smoke Detection Arrives Too Late
A smoke detector works when combustion products reach it, and in a tall building, an open yard or a space with a warm roof that may never happen. The fire that starts at floor level in a fourteen metre warehouse has to fill a very large volume before anything at roof level sees it, and by then the window in which a local response changes the outcome has closed. This is the entire reason optical flame detection exists as a separate category rather than as an upgrade of smoke detection.
The second reason is the fuel. A liquid pool fire, a gas release that has ignited and a lithium cell that has failed internally all develop far faster than a smouldering fire in furniture, and the design case in those applications is measured in seconds. Where the consequence of a late alarm is a shutdown, an evacuation or an escalation to a second asset, the detection is specified for the first seconds rather than for the first minutes.
The third reason is the space itself. Positions we are asked to cover include flame detector for warehouse, flame detector for factory, flame detector for industrial plant, flame detector for manufacturing plant, flame detector for chemical plant, flame detector for refinery, flame detector for oil and gas, flame detector for petrochemical, flame detector for offshore platform, flame detector for marine, flame detector for ship, flame detector for mining, flame detector for tunnel, flame detector for underground, flame detector for power plant, flame detector for substation, flame detector for solar farm, flame detector for wind turbine, flame detector for battery storage, flame detector for lithium battery, flame detector for energy storage, flame detector for EV charging station, flame detector for charging pile, flame detector for gas station, flame detector for fuel depot, flame detector for LPG storage, flame detector for pipeline, flame detector for compressor station, flame detector for loading rack, flame detector for airport, flame detector for train station, flame detector for subway, flame detector for bus terminal, flame detector for ferry terminal, flame detector for seaport, flame detector for marina, flame detector for parking garage, flame detector for bridge, flame detector for construction site and flame detector for temporary building, and a large part of that list has no ceiling for smoke to collect under at all.
How a Flame Detector Works: From Radiation to Alarm Decision
A flame emits radiation across ultraviolet and infrared bands and it flickers at a frequency of its own. An optical flame detector looks at one or both of those behaviours and decides whether what it sees is a flame or something else that happens to be bright, hot or moving. The decision is not a brightness threshold, which is the part most buyers are misinformed about, and it is the reason a correctly specified device can sit in front of a hot turbine without alarming on it.
The confirmation window is the part that decides behaviour on a real site. A device set to a short window responds faster and is more likely to trip on a welding arc; a device set to a longer one is quieter and slower. Neither setting is right in the abstract, and the value belongs on the commissioning sheet next to a reason rather than on a factory default nobody recorded. The self-check covers the optical path and reports fault, but a self-check is not proof that the device can still see the hazard, and conflating those two is a common and expensive mistake.
Where the design calls for detection before there is a flame at all, a thermal device reads the heating that comes first. Where the design calls for recognising flame in a large open volume, a camera based device reads the image. Where the design calls for the fastest possible response to a gas fire, a ultraviolet device is still the quickest of the optical types and the most easily blocked. Each of those is a different answer to a different question, and the honest specification starts with the question.
Field of View, Background Sources and False Alarm Planning in Portugal
An optical device detects a cone, not an area, and anything inside that cone between the device and the hazard reduces what it can see. Racking, pipework, a stack of material that grew over a season, steam, dust and a film of oil on the window all belong on the list. We review the drawings and put the cone count in writing before there is a price, because a figure quoted per square metre is not a design and a layout drawn from a floor plan rather than from a hazard list is the most common reason a system underperforms.
False alarm sources are the second planning job. Welding, cutting, vehicle headlights, sunrise through a glazed elevation, hot surfaces inside the field of view and flares outside the boundary each produce one signature or the other, and the response is a combination of aiming, band choice and confirmation window rather than a sensitivity control turned down until the noise stops. A device that the operators have muted is worse than no device, because the real event gets the same response as the last nine false ones.
Positions we are asked to cover also include flame detector for portable building, flame detector for container office, flame detector for data center, flame detector for server room, flame detector for electrical room, flame detector for boiler room, flame detector for HVAC, flame detector for generator room, flame detector for UPS room, flame detector for battery room, flame detector for telecom shelter, flame detector for museum, flame detector for archive, flame detector for library, flame detector for heritage building, flame detector for temple, flame detector for church, flame detector for mosque, flame detector for hotel, flame detector for restaurant, flame detector for kitchen, flame detector for shopping mall, flame detector for supermarket, flame detector for office, flame detector for school, flame detector for hospital, flame detector for nursing home, flame detector for elderly care, flame detector for residential building, flame detector for apartment, flame detector for condo, flame detector for house, flame detector for villa, flame detector for cabin, flame detector for RV, flame detector for boat, flame detector for camper, flame detector for caravan, flame detector for military base and flame detector for prison, and the honest answer is that not every one of those positions is a good application for an optical device. Where it is not, we say so before you order rather than after.
Flame Detector OEM & ODM Programs for Distributors and Trading Partners in Portugal
We are recruiting local distributors and export trade partners worldwide, and we are explicit about what that means in this category. The partner owns the client relationship, the installation and the after sales agreement; we own the device, the documentation and the configuration. Programmes cover flame detector manufacturer, flame detector supplier, flame detector factory, flame detector OEM, flame detector ODM, private label flame detector, white label flame detector, custom flame detector, branded flame detector, flame detector wholesale, flame detector bulk supplier, flame detector exporter, China flame detector manufacturer, flame detector supplier China, flame detector factory China, flame detector factory direct, flame detector price, flame detector MOQ, flame detector sample order, flame detector bulk order, flame detector shipping, flame detector export, flame detector FOB, flame detector CIF, flame detector EXW, flame detector distributor, flame detector importer, flame detector trading company, flame detector procurement, flame detector sourcing, flame detector supply chain, flame detector inventory, flame detector stock, flame detector ready to ship, flame detector fast delivery, flame detector lead time, flame detector production capacity, flame detector customization, flame detector packaging, flame detector labeling, flame detector branding, flame detector certification support, flame detector technical documentation, flame detector user manual, flame detector installation guide, flame detector warranty, flame detector after-sales, flame detector spare parts, flame detector accessories, flame detector with UL, flame detector with FM, flame detector with CE, flame detector with ATEX, flame detector with IECEx, flame detector with EN 54, flame detector with RoHS, flame detector with FCC, flame detector with SIL2, flame detector with SIL3, flame detector for Europe, flame detector for USA, flame detector for Middle East, flame detector for Southeast Asia, flame detector for Africa, flame detector for South America, flame detector for Australia, flame detector for Canada, flame detector for UK, flame detector for Germany, flame detector for France, flame detector for Italy, flame detector for Spain, flame detector for Netherlands, flame detector for Poland, flame detector for Saudi Arabia, flame detector for UAE, flame detector for Thailand, flame detector for Vietnam, flame detector for Indonesia, flame detector for India, flame detector for Brazil and flame detector for Mexico.
- Distributor and wholesaler program: part numbering held under your scheme so repeat orders do not depend on ours
- Private label and ODM program: MOQ quoted per configuration and stated in writing at the order stage
- Project and submittal support: submittal package assembled in the format your consultant expects rather than in ours
- Regional partner structure: housing colour, logo, part number and label artwork configured before tooling
- Factory capability behind the offer: certificate numbers traceable to a specific configuration rather than to a range name
- Service and replacement cycle coverage: neutral housing as the default, so your brand is not competing with ours on the wall
- Logistics and consolidation: sample orders shipped on the same documentation path as bulk orders
- Export documentation per destination: technical file per destination, with the standards named rather than implied
- Spare and accessory kits: tiered factory pricing by order volume rather than a single unit price
- After sales and replacement cycle: sample order shipped before bulk, on the same documentation path
Product Introduction: Wireless Flame Alarm by Wanlin Fire
What follows is the configuration as it ships, with everything that varies by order stated as varying rather than as a headline figure. Where the obstacle is the trench rather than the detection, the WANLIN-620 is chosen with a link survey done first rather than a coverage claim made first.
Configurations in the range cover flame detector, flame alarm, flame sensor, flame detection device, flame monitoring system, UV flame detector, ultraviolet flame detector, UV flame sensor, UV flame detection, IR flame detector, infrared flame detector, IR flame sensor, infrared flame detection, point IR flame detector, point infrared flame detector, multi-spectrum flame detector, triple IR flame detector, dual IR flame detector, single IR flame detector, UV/IR flame detector, UV IR flame detector, UV/IR flame sensor, explosion proof flame detector, explosion proof flame sensor, intrinsically safe flame detector, ATEX flame detector, IECEx flame detector, industrial flame detector, commercial flame detector, smart flame detector, intelligent flame detector, AI flame detector, AI flame recognition detector, AI flame detection camera, video flame detector, video flame detection, camera flame detector, thermal flame detector, thermal imaging flame detector, 4G flame detector, 4G flame alarm, wireless flame detector, wireless flame alarm, IoT flame detector, connected flame detector, cloud flame detector, remote flame detector, warehouse flame detector, charging station flame alarm, EV charging flame detector and battery storage flame detector. The right one depends on the fuel, the field of view and what sits between the two rather than on which name leads the catalogue.
Detection principles available across the range cover UV flame detection, ultraviolet flame sensing, IR flame detection, infrared flame sensing, point IR detection, multi-spectrum flame sensing, triple IR flame detection, dual IR flame detection, UV/IR flame detection, UV/IR flame sensing, flame spectroscopy, flame radiation detection, flame flicker detection, flame frequency detection, flame signature analysis, flame pattern recognition, flame image processing, flame video analytics, flame thermal detection, flame optical detection, flame photoelectric detection, flame semiconductor detection, flame electrochemical detection, flame catalytic detection, flame ionization detection, flame infrared thermography, flame ultraviolet spectroscopy, flame infrared spectroscopy, flame dual-band detection, flame triple-band detection, flame four-band detection, flame multi-criteria detection, flame multi-sensor fusion, flame detection algorithm, flame detection AI, flame detection machine learning, flame detection deep learning, flame detection neural network, flame detection computer vision, flame detection edge computing, flame detection cloud analytics, flame detection remote monitoring, flame detection real-time alert, flame detection early warning, flame detection high sensitivity, flame detection low false alarm, flame detection adjustable sensitivity, flame detection wide temperature, flame detection high humidity, flame detection dustproof, flame detection waterproof, flame detection IP65, flame detection IP66, flame detection IP67, flame detection explosion proof, flame detection intrinsically safe, flame detection SIL2, flame detection SIL3, flame detection ATEX certified, flame detection IECEx certified, flame detection UL listed and flame detection FM approved. Which of those applies to your order is stated per model datasheet rather than claimed across the range.
Smart and connected options cover smart flame detector, intelligent flame detector, AI flame detector, AI flame recognition, AI flame detection camera, AI fire detection, machine learning flame detection, deep learning flame detection, computer vision flame detection, video flame detection, video smoke and flame detection, thermal imaging flame detection, infrared thermal camera flame detection, UV camera flame detection, multi-sensor flame detector, multi-criteria flame detector, IoT flame detector, IoT flame alarm, connected flame detector, cloud connected flame detector, cloud flame monitoring, remote flame monitoring, real-time flame alert, push notification flame alarm, SMS flame alert, email flame alert, voice call flame alarm, mobile app flame control, smartphone flame alert, app controlled flame detector, remote flame diagnostics, OTA firmware update flame detector, data logging flame detector, event history flame alarm, self-test flame detector, automatic self-check flame detector, fault monitoring flame alarm, low battery warning flame alarm, tamper proof flame detector, anti-tamper flame alarm, wireless flame detector, wireless flame alarm, WiFi flame detector, Zigbee flame detector, Z-Wave flame detector, Bluetooth flame detector, RF flame detector, 4G flame detector, 4G LTE flame alarm, 4G cellular flame detector, NB-IoT flame detector, LoRa flame detector, LoRaWAN flame detector, 5G flame detector, cellular flame detector, GSM flame alarm, addressable flame detector, conventional flame detector, analog flame detector, digital flame detector, standalone flame detector, independent flame detector, networked flame alarm, interconnected flame detector, building-wide flame detection, multi-room flame monitoring, integrated flame alarm system, BMS integrated flame detector, SCADA integrated flame detector, Modbus flame detector, BACnet flame alarm and MQTT flame detector.
Hazardous area configurations cover explosion proof flame detector, flameproof flame detector, intrinsically safe flame detector, ATEX flame detector, IECEx flame detector, UL listed explosion proof flame detector, FM approved explosion proof flame detector, Class I Division 1 flame detector, Class I Division 2 flame detector, Zone 0 flame detector, Zone 1 flame detector, Zone 2 flame detector, hazardous area flame detector, oil and gas flame detector, refinery flame detector, petrochemical flame detector, chemical plant flame detector, offshore platform flame detector, marine flame detector, ship flame detector, mining flame detector, tunnel flame detector, underground flame detector, industrial flame detector, manufacturing plant flame detector, factory flame detector, warehouse flame detector, logistics center flame detector, cold storage flame detector, refrigerated warehouse flame detector, battery storage flame detector, lithium battery flame detector, energy storage flame detector, EV charging station flame detector, charging pile flame alarm, solar farm flame detector, wind turbine flame detector, power plant flame detector, substation flame detector, transformer flame detector, switchgear flame detector, electrical room flame detector, boiler room flame detector, generator room flame detector, turbine room flame detector, compressor station flame detector, pipeline flame detector, loading rack flame detector, fuel depot flame detector, gas station flame detector and LPG storage flame detector. The zone comes from your area classification study and the certificate has to match it, which is a design step rather than a product feature.
Technical Specifications
| Parameter | Wanlin Fire Specification |
|---|---|
| System reference | WANLIN-620 Wireless Flame Detector |
| Product category | Flame detector with a radio link to the control equipment, for positions where a cable run is the obstacle rather than the detection |
| Detection target | Open flame within the field of view, with the event carried over the radio link |
| Sensing element | Optical sensing element with the spectral band stated per model datasheet |
| Processing platform | Single-core 1.2 GHz processor with a 0.5 TOPS neural processing unit running the flame recognition analysis on the device |
| Visible channel | 1/3 CMOS sensor at 2560 x 1440, fixed-focus 3 mm lens at F1.6 aperture |
| UV channel | Wide-angle ultraviolet sensing with a detection cone of 80 degrees or more, detection distance up to 15 m, sensitivity adjustable at commissioning |
| Video streams | Main stream at 2560 x 1440, 1920 x 1080 or 1280 x 720; sub stream at 704 x 576, 960 x 544, 640 x 360 or 320 x 184 |
| Video compression | H.265 and H.264 BP/MP/HP encoding, bitrate 30 Kbps to 16 Mbps adjustable, CBR or VBR rate control |
| Audio | G.711A, G.711U or AAC audio encoding per the specification sheet |
| Image settings | Contrast, brightness and saturation adjustable at commissioning |
| Alarm logic | Spectral and flicker evaluation on the device, with the confirmation window set at commissioning |
| Protocol and integration | Radio link to the control equipment, with WiFi, Zigbee, Z-Wave, RF, LoRa and LoRaWAN options on the configured variant |
| Notification path | Alarm carried to the panel over the radio link, with local indication at the device |
| Alarm behaviour | The alarm latches until reset, the link quality and fault states are reported separately, and the self-check covers both the optical path and the radio |
| Power supply | Primary cell, sealed long life cell or external supply depending on configuration, with ratings per model datasheet |
| Housing and mounting | Housing rating per model datasheet with a bracket for final aiming |
| Installation pattern | Positioned for the field of view rather than for the cable route, with the link survey done before the fixings are chosen |
| Field of view and aiming | UV channel detection cone of 80 degrees or more per the specification sheet, treated as a cone rather than an area, with the aiming recorded on the commissioning sheet |
| Configuration and thresholds | Confirmation window, sensitivity and output mapping set at commissioning and recorded on the commissioning sheet |
| Maintenance and self test | Automatic self-check with fault, obscured lens and tamper conditions reported separately, test interval set by the site operator |
| Export documentation support | Technical file prepared to support local code submittals and national registration by the importer of record, including hazardous area file sets where they apply |
| Certification documents | CE, RoHS and REACH documentation per applicable model, with EN 54-10 and FM 3260 route papers where the device class applies and ATEX or IECEx papers per configuration, certificate number provided on request |
| OEM and ODM options | Logo, part number, packaging, manual languages, label artwork and platform identity string configurable |
| Full datasheet | Complete optical, electrical, radio and environmental data provided per model on request |
| Warranty | 36-month |
Application Scenarios for Flame Detection in Portugal
| Scenario | Recommended unit | Key benefits |
|---|---|---|
| Listed building where a cable run would damage the fabric | WANLIN-620 | Detection goes in without cutting, which is usually the condition the consent is granted under |
| Temporary process skid hired in for a shutdown | WANLIN-620 | The device is fitted for the duration and removed afterwards instead of being written off |
| Remote pump station with no power within a hundred metres | WANLIN-620 | The radio link removes the trenching that was the reason the position was left uncovered |
| Open storage yard that gets re-laid every season | WANLIN-620 | Devices move with the layout instead of being abandoned where the old one was |
Certification, Standards and National Registration Support for Portugal
Documentation is prepared per destination rather than reused from the last market, and where a market runs its own scheme the file is prepared to support that submittal. Coverage includes UL 268 flame detector, UL 521 flame detector, FM 3260 flame detector, FM 3210 flame detector, EN 54-10 flame detector, EN 54-7 smoke detector, EN 54-5 heat detector, EN 54-25 wireless fire alarm, CE certified flame detector, CE marked flame detector, RoHS compliant flame detector, REACH compliant flame detector, FCC certified flame detector, ATEX certified flame detector, IECEx certified flame detector, SIL2 flame detector, SIL3 flame detector, NFPA 72 flame detector, NFPA 15 flame detector, NFPA 30 flame detector, NFPA 70 flame detector, BS 5839 flame detector, ISO 7240 flame detector, ISO 9001 flame detector manufacturer, ISO 14001 flame detector manufacturer, EAC certified flame detector, GOST certified flame detector, CCCF certified flame detector, TISI certified flame detector, SNI certified flame detector, SIRIM certified flame detector, PS Mark flame detector, DTI-BPS certified flame detector, BFP approved flame detector, BIS certified flame detector, SASO certified flame detector, SABER certified flame detector, Civil Defense approved flame detector, SBC 801 compliant flame detector and NIST traceable calibration flame detector. Which of those applies is determined by the destination and by the configuration rather than by us, and a certificate number is provided on request so your client can verify the issuing body reference directly.
| Item | Details |
|---|---|
| Product | Wireless Flame Alarm |
| System Reference | WANLIN-620 |
| Standard Route | flame detector with a radio link, with radio compliance support for the wireless configuration and local code submittal support per installation, with CE, RoHS and REACH documentation per applicable model |
| Hazardous area route | ATEX and IECEx route papers per configuration, with the protection concept, gas group and temperature class named on the certificate |
| Fire system route | EN 54-10 where the destination names it, FM 3260 route papers where the class applies, and NFPA 72, NFPA 15 and NFPA 30 references for the installation design |
| National registration support | local code submittal support with per-configuration technical files, hazardous area certificate evidence and national registration support for the importer of record, with UKCA, EAC and GOST, CCCF, TISI, SNI, SIRIM, PS Mark, DTI-BPS, BIS, SASO and SABER documentation prepared per destination |
| Verification and acceptance | Certificate number provided on request, and final acceptance rests with the market authority rather than with the factory |
| Factory quality system | ISO 9001 and ISO 14001 documented manufacturing, with calibration and test records kept per unit |
Why Choose Wanlin Fire as Your Flame Detector Manufacturer for Portugal
The comparison that matters in this category is not the datasheet against the datasheet, it is whether the supplier can produce the same file twice.
If you are comparing us with an established brand, the honest comparison is a specific one. Buyers arrive having looked at Honeywell flame detector alternative, Det-Tronics flame detector alternative, Siemens flame detector competitor, Bosch flame detector alternative, Panasonic flame detector competitor, Hochiki flame detector alternative, Apollo flame detector competitor, System Sensor flame detector alternative, Edwards flame detector competitor, General Monitors flame detector alternative, MSA flame detector competitor, Draeger flame detector alternative, Oldham flame detector competitor, Simtronics flame detector alternative, Spectrex flame detector competitor, Forney flame detector alternative, Fireye flame detector competitor, Rosemount flame detector alternative, Emerson flame detector competitor, ABB flame detector alternative, Schneider flame detector competitor, Johnson Controls flame detector alternative, China flame detector alternative, Chinese flame detector competitor, affordable flame detector, cost-effective flame detector, high-quality low-price flame detector, flame detector made in China, Chinese flame detector quality comparison and flame detector price comparison China vs Europe. The three things that decide it are the certificate number, the stated test fire behind any response claim, and the documents that arrive with the shipment, and those are the three we put in writing before you order.
The configurations buyers ask for most often sit in the current list: AI flame recognition detector, AI flame detection camera, video flame detection camera, thermal imaging flame detector, IR3 flame detector, UV/IR flame detector, multi-spectrum flame detector, explosion proof flame detector, intrinsically safe flame detector, 4G flame detector, 4G flame alarm, wireless flame detector, IoT flame detector, cloud flame detector, remote flame monitoring, real-time flame alert, early warning flame detector, high sensitivity flame detector, low false alarm flame detector, adjustable sensitivity flame detector, wide temperature flame detector, high humidity flame detector, dustproof flame detector, waterproof flame detector, IP65 flame detector, IP67 flame detector, SIL2 flame detector, SIL3 flame detector, ATEX flame detector, IECEx flame detector, UL listed flame detector, FM approved flame detector, EN 54-10 flame detector, NFPA 72 flame detector, flame detector for warehouse, flame detector for charging station, flame detector for battery storage, flame detector for data center, flame detector for oil and gas and flame detector for power plant. We quote against whichever of those your market actually searches for rather than against a single catalogue name, and where a configuration is not the right answer for your hazard we say so.
| Criterion | Wanlin Fire | Typical trading office |
|---|---|---|
| Price | Tiered factory pricing with 32% margin headroom typical for repeat partners, quoted per model and configuration | Single unit price with no configuration detail |
| Documentation | Certificate numbers, technical file per destination, test reports per model | General statement of compliance |
| Design support | Drawings review and cone count in writing before quotation | Coverage figure quoted per square metre |
| Configuration | Housing, logo, part number, packaging, manual languages and label artwork configurable | Factory branding on the housing |
| Lead time and stock | Ready to ship stock on standard configurations plus build slots for configured orders | Lead time quoted after the order |
| After sales | Spare parts and replacement cycle held under your part numbers | Handled case by case |
Flame Detector OEM Process: From Inquiry to Shipment
A first order in this category goes better when the sequence is drawings, certificate, sample and then volume, in that order. A standard order then follows 8 steps:
- Tell Us the Destination and the Hazard: the country, the fuel, the field of view and the standard your authority names. Without those four there is no specification, only a part number.
- Drawings Review and Cone Count: we mark the devices on your layout and state the count in writing before there is a price.
- Certificate and Route Check: protection concept, gas group, temperature class and zone confirmed against your area classification study.
- Configuration Confirmation: band, output, protocol, housing rating, power and labelling fixed and recorded on the order sheet.
- Sample Order: shipped on the same documentation path as the bulk order rather than as a favour.
- Production and Test: calibration and test records kept per unit, with the test fire stated where it applies.
- Documentation Pack: declarations, technical file, test reports and labelling in the language your market expects.
- Shipment and Consolidation: FOB, CIF or EXW terms, consolidated with the rest of your fire product order where it helps your freight.
Customer Testimonials
Three partners describe what changed after they moved the programme, in their own words.
- Marco Rossi (Refinery Safety Engineer, Chicago, United States): "We lost a tender on documentation once, so now we ask for the certificate number before we ask for the price."
- Ahmed Rahman (Battery Storage Project Manager, Toronto, Canada): "What I valued was being told where the device was the wrong choice, because we had a position where it genuinely was."
- Nguyen Van Minh (Fire Safety Distributor, Lisbon, Portugal): "The sample arrived with the same paperwork as the bulk order, which sounds small and is not small at all."
Frequently Asked Questions
Q: Is a wireless detector as reliable as a wired one?
A: No, and this is worth being blunt about. A radio link adds a dependency a cable does not have: battery state, link margin and interference. What wireless buys is coverage of positions that would otherwise be left unmonitored, which is a better outcome than a perfect device that never got installed. We recommend a link survey before the design is fixed.
Q: How long does the battery last?
A: Per model datasheet, and it depends on the reporting interval and the environment rather than on a headline figure. The device reports a low battery condition separately, and the replacement interval is the site operator decision. Any supplier quoting one number across all configurations is not describing the actual product.
Q: Can the link be interfered with?
A: Yes, and this is why the survey matters. Metal structures, other radio systems on the same band and the distance to the receiver all affect the margin. Where the survey shows a weak position, the answer is a repeater or a wired device, not hope.
Q: What happens if the link drops?
A: The fault is reported rather than being silent, which is the design requirement. A wireless device that fails quietly is worse than no device, because the site believes it is covered when it is not, and this is the failure mode we design against most carefully.
Q: Can it be interconnected with other detectors?
A: On the configured variant, yes, and interconnected flame detector arrangements are common where a site wants a local alarm across a building rather than a signal to one panel. The interconnection group and the response are set at commissioning and recorded.
Project Summary
Net result: By working directly with manufacturer Wanlin Fire, Lisbon Fire Safety Distributor Nguyen Van Minh gained 32% margin headroom through factory direct sourcing, a written cone count, per-model documentation and a commissioning sheet the site can produce after an event. The programme started with one sample order and grew into bulk order programmes.
For more information: www.wanlinfire.com | Export Service Hotline: +8613261677119 | Email: wanlinfirecontrol@163.com
- Shenzhen HQ: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
